Wednesday, 16 January 2019
Wednesday, 9 January 2019
Difference between Rate Law and the law of mass action?
Rate
Law: In
rate law, the concentrations of reactants are raised to some power which may or
may not be equal to the Stoichiometric coefficient of the reaction.
Law of Mass Action: In the law of mass
action, the concentrations of reactants and products are raised to the power of
their Stoichiometric coefficient.
The main difference between rate law and law of mass action is
that, rate law is given considering only the reactants of a reaction whereas
law of mass action is given considering both reactants and products of a
reaction.
The
Rate Law cannot be determined by just looking at the given chemical equation
but, instead, can be determined only experimentally. However, the Law of Mass
Action can be determined by just looking at the chemical equation.
According
to this “Law of Mass Action”, for a given reaction of the form:
aA + bB —→ Products,
the rate of reaction = k[A]^a[B]^b
where k is the equilibrium constant.
aA + bB —→ Products,
the rate of reaction = k[A]^a[B]^b
where k is the equilibrium constant.
But experimentally, it has been found out that the rate of
reaction may not necessarily depend on all the ‘a’ concentration terms of A or
on all the ‘b’ concentration terms of B but only on some partial amount of the
total concentration of A or B, say, x and y respectively.
i.e.,
Rate of Reaction = k[A]^x[B]^y
where, x and y may or may not be equal to a and b.
This above expression is called Rate Law.
i.e.,
Rate of Reaction = k[A]^x[B]^y
where, x and y may or may not be equal to a and b.
This above expression is called Rate Law.
Monday, 7 January 2019
jee practice papers
https://drive.google.com/drive/folders/1iywtelcZrrPBweRnZg3rdB8Pzasf2J4q?ogsrc=32
https://drive.google.com/drive/folders/1iywtelcZrrPBweRnZg3rdB8Pzasf2J4q?ogsrc=32
https://drive.google.com/drive/folders/1iywtelcZrrPBweRnZg3rdB8Pzasf2J4q?ogsrc=32
Friday, 4 January 2019
Acidic and Basic strength in different cases complete information
TYPE 1.
p-Nitrophenol >
p-Chlorophenol > phenol > p-Cresol > p-Methoxy phenol
p-NitroBenzoic acid >
p-ChloroBenzoic acid > Benzoic acid > p-Toluic acid > p-Methoxy
Benzoic acid
p-NitroAniline <
p-ChloroAniline < Aniline < p-Toluidine < p-MethoxyAniline
TYPE 2…
o-BromoPhenol
> m-BromoPhenol > p-BromoPhenol > Phenol [10]
o-ChloroPhenol [8.48] > m-ChloroPhenol [9.02] >
p-ChloroPhenol [9.38]> Phenol
o-FluoroPhenol [8.81] > m-FluoroPhenol [9.28] >
p-ChloroPhenol [9.95]> Phenol
o-Bromobenzoic acid [3.1] > m-BromoBenzoic acid [3.93]>
p-BromoBenzoic acid [4.1] > Benzoic acid [4.17]
o-ChloroBenzoic acid [2.89] > m-ChloroBenzoic acid
[3.82]> p-ChloroBenzoic acid [3.98]> Benzoic acid [4.17]
p-ChloroPhenol [9.38] > p-FluoroPhenol [9.95]
> p-BromoPhenol > p-IodoPhenol > Phenol
p-ChloroBenzoic
acid [3.98] > p-FluoroBenzoic acid [4.14] > p-BromoBenzoic acid
[4.1] > p-IodoBenzoic acid > Benzoic acid
o-Bromoaniline [11.4] < m-Bromoaniline [10.49] <
p-Bromoaniline [10.09] < Aniline
TYPE 3….
Phenol > m-Cresol [10.08] > p-Cresol [10.14] >
o-Cresol [10.28]
O-Toluic acid [3.89] > Benzoic acid [4.17]> m-Toluic acid
[4.28] > p-Toluic acid [4.35]
O-Toluidine < Aniline < m-Toluidine <
p-Toluidine
TYPE 4…
m-Methoxyphenol [9.65] > Phenol >
o-Methoxyphenol [9.98] > p-Methoxyphenol [10.21]
m-HydroxyPhenol (Benzene-1,3-diol) [9.44] > o-Hydroxyphenol
(Benzene-1,2-diol) [9.48] > p-Hydroxyphenol (Benzene-1,4-diol) [9.96] >
Phenol [10]
o-Methoxybenzoic
acid = m- Methoxybenzoic acid > Benzoic acid > p-Methoxybenzoic acid
2,6-diHydroxybenzoic acid [2.3] >
o-HydroxyBenzoic acid [2.98] > m-HydroxyBenzoic acid [4.08] > Benzoic
acid > p-HydroxyBenzoic acid [4.58]
p-Methoxyaniline > Aniline >
o-MethoxyAniline > m-Methoxyaniline [o-isomer should be weakest due to Ortho
effect, but in meta-isomer, there is only –I effect hence it becomes weakest
base]
TYPE 5…..
p- NitroPhenol [7.15] > o-Nitrophenol
[7.23] > m-Nitrophenol [8.40] > Phenol
[o-isomer must be strongest acid, but due to chelation (intramolecular H-bonding) b/w adjacent–OH & – NO2, deprotonation becomes slightly difficult.]
[o-isomer must be strongest acid, but due to chelation (intramolecular H-bonding) b/w adjacent–OH & – NO2, deprotonation becomes slightly difficult.]
o-NitroBenzoic acid > p-NitroBenzoic
acid > m-NitroBenzoic acid > Benzoic acid
o-Nitroaniline < p-Nitroaniline < m-Nitroaniline <
Aniline
TYPE 6…..
0-Aminophenol [9.71] > m-Aminophenol [9.87] > Phenol > p-Aminophenol[10.3]
Benzoic
acid [4.17] > m-Aminobenzoic acid [4.79] > p-AminoBenzoic acid [4.92]
> o-Aminobenzoic acid (Anthranilic acid) [4.98]
TYPE
7..[HYDROGEN BONDING]
pKa1 (phthalic acid or Benzene-1,2-dicarboxylic acid) <
pKa1(Terephthalic acid or Benzene-1,4-dicarboxylic acid) < pKa1 (Isophthalic
acid or Benzene-1,3-dicarboxylic acid)
pKa1 (maleic acid) < pKa1(fumaric acid); pKa2 (maleic acid)
> pKa2(fumaric acid)
TYPE
8..[SIR EFFECT]
2,6-diMethylbenzoic acid [3.21] > 2-t-ButylBenzoic acid [3.46]
> o-Toluic acid [3.91]
3,5-diMethyl-4-CyanoPhenol > 2,6-diMethyl-4-CyanoPhenol ;
[Here, “NO” SIR effect as Cyano is a linear group so, second is less acidic due to closeness of both methyl group to –OH hence greater +I decreases acidic character.]
[Here, “NO” SIR effect as Cyano is a linear group so, second is less acidic due to closeness of both methyl group to –OH hence greater +I decreases acidic character.]
2,6-diMethyl-4-NitroPhenol > 3,5-diMethyl-4-NitroPhenol
[In second, due to SIR effect, Nitro group goes out of plane & hence unable to withdraw electron by –R effect.]
[In second, due to SIR effect, Nitro group goes out of plane & hence unable to withdraw electron by –R effect.]
2,4-diNitroBenzoic
acid > 2-NitroBenzoic acid > 3,5-diNitroBenzoic acid
TYPE 9..[GENERAL ORDER]
RCO2H > RCO3H (peroxycarboxylic acids)
RSO3H > RCOOH > H2CO3 [6.3] > C6H5OH [10] > CH3OH
[15.5] > H2O [15.7]> ROH > RC#CH > NH3 > RCH=CH2 > RCH3 >
H2
RSH >ROH
TYPE 10..[GENERAL EXCEPTIONS]
Formic acid [3.75] > Benzoic acid
[4.17] > Acetic acid [4.74] [IIT 85]
C6H5-CH2-CO-OH > CH2=CH-CH2-CO-OH
CH#C-CO-OH > CH2=CH-CO-OH > CH3CH2COOH
CH#C-CH2-CO-OH [3.22] > CH2=CH-CH2-CO-OH [4.35]
TYPE 11..(GASEOUS PHASE/FIELD EFFECT)
t-BUTANOL > n-BUTANOL
PROPANOIC ACID
> ACETIC ACID
TYPE 12..[GENERAL]
pKa value of CF3-CO-OH is zero (0.18) & it is the strongest
organic acid known.[(10^5 times stronger than acetic acid.]
Formic acid is 10 times stronger than Acetic Acid.
N3H [2.810^(-5)] > CH3COOH [1.810^(-5)]
Beta-KETOESTERS are stronger acids than Alcohols & Esters.
NC-CH2-CO-OH > CH3-CO-CH2-CO-OH
CH3COOH > HO-CH2=CH2-OH > HO-OH >
CH3CH2OH [IIT-80]
OXIMES(>C=N-OH) > HYDROXYL AMINE (NH2OH)
TYPE 14..[ACID-BASE REACTIONS]
Acid-base equilibriums move towards formation of weaker acids
& weaker bases.
2,4,6-triNitroPhenol or Picric acid [0.38] does dissolve in
aq NaHCO3
Carboxylic acids
dissolves in aq NaHCO3 whereas Phenol does not.
4-ChloroPhenol dissolves
in NaOH (aq.) whereas 4-Chloro-1-methylBenzene does not.
·
Electron releasing
groups (ERG) increase e- density of bases or stabilises “cationic conjugate
acids” & hence increase basic character.
·
EWG increase
stabilisation of “anionic” conjugate bases & hence increase acidic character.
·
Acidic Character is
proportional to Stability of corresponding conjugate base.
·
Basic Character is
proportional to Stability of corresponding conjugate acid.
·
Inductive effect
operates from ortho as well as meta & para-positions & inductive effect
is strongest from ortho position (being nearest).
·
Resonance or mesomeric
effect does not affect from groups attached at meta positions. However it does
affect from both ortho and para-positions with equal intensity.
·
Alkyl groups exert release
e- by hyperconjugation effect (+H) from ortho & para-positions.
·
The groups having lone
pair at the key atom (e,g -OH, -OR, -O-CO-R, -NH2, -NHR, NR2, -NH-CO-R, -X
etc.) exert +R effect(release e- by resonance) when conjugated
(alternate or attached) to unsaturated system like aromatic ring e,g,
Benzene ring.
·
Order of +R effect: -NH2
> -OR > -OH >-OCH3 > -OCOR > -F > -Cl
·
CH3OH
is slightly stronger acid than water hence -OCH3 is slightly more e- donating
than -OH.
·
For
-Cl, -Br & -I , +R effect is almost ineffective due to poor overlap of 2p
orbital of Carbon with 3p or 4p or 5p of Cl, Br or I.
·
The groups having Key
atom multiply bonded to more powerful electronegative atoms (e.g -NO2, -CN,
-CHO, -CO-R, -COCl, -CONH2, -CO-O-COR, -CO-OR, etc) exert
-R effect (withdraw e- by resonance) when
conjugated (alternate or attached) to unsaturated system like
aromatic ring e,g, Benzene ring.
·
Due
to ortho effect, in most cases,-
·
“Ortho-isomer
of Benzoic acid is strongest Acid as compared to Simple benzoic acid or meta
& para-isomers & Ortho- isomer of Aniline is Weakest Base as
compared to Simple Aniline or meta & para-isomers.”
Thursday, 13 December 2018
Monday, 22 October 2018
NEET-AIPMT 1988 TO 2017 CHAPTER WISE PRACTICE QUESTIONS
NEET-AIPMT 1988 TO 2017 CHAPTER WISE PRACTICE QUESTIONS
https://drive.google.com/drive/folders/1GCz4fdwDDs33IBov1kiz5kCayiJhTIcU
https://drive.google.com/drive/folders/1GCz4fdwDDs33IBov1kiz5kCayiJhTIcU
Subscribe to:
Posts (Atom)
ANCIENT SCIENCE
https://www.youtube.com/watch?v=1eetRjqkUkQ&list=PLuR244LTfD1Dlu2JBzy6yKTCU1DBJv6oy&index=5 https://youtu.be/1eetRjqkUkQ
-
NEET-AIPMT 1988 TO 2017 CHAPTER WISE PRACTICE QUESTIONS https://drive.google.com/drive/folders/1GCz4fdwDDs33IBov1kiz5kCayiJhTIcU
-
In inorganic chemistry and especially in binary compounds they have the habit to use an order based on electronegativity: the least ...
-
https://drive.google.com/file/d/0B0j8xA2-VWfobnVCcVpuM2gtRW1QY1RfaEdudnBIRE1xVlV3/view https://drive.google.com/file/d/0B0j8xA2-VWfobnVC...