Wednesday, 16 January 2019

Why is NH3 not written as H3N?



In inorganic chemistry and especially in binary compounds they have the habit to use an order based on electronegativity: the least electronegative element being cited first.
  • Sulfur hexafluoride: SF
  • Ammonia: NH
  • Calomel: HgCl
  • Diborane: BH
As correctly commented by Eric Ressner Ammonia does not follow the simple electronegativity rule: electronegativity of nitrogen is 3.0 hydrogen is 2.2 (Linus Pauling scale).
So I double checked the guidance: the correct element sequence is ‘inspired by’ electronegativity, but with a few exceptions. This is detailed in Table VI (p 260 of the red book):
By convention, the later an element occurs when the table is traversed following the arrows, the more electropositive is the element.
Hydrogen is placed on top of Nitrogen. So NH is following the ‘rule’.


jee 2019 videos

Wednesday, 9 January 2019

Difference between Rate Law and the law of mass action?


Rate Law: In rate law, the concentrations of reactants are raised to some power which may or may not be equal to the Stoichiometric coefficient of the reaction.
Law of Mass Action: In the law of mass action, the concentrations of reactants and products are raised to the power of their Stoichiometric coefficient.
The main difference between rate law and law of mass action is that, rate law is given considering only the reactants of a reaction whereas law of mass action is given considering both reactants and products of a reaction.


The Rate Law cannot be determined by just looking at the given chemical equation but, instead, can be determined only experimentally. However, the Law of Mass Action can be determined by just looking at the chemical equation.
According to this “Law of Mass Action”, for a given reaction of the form:
aA + bB —
→ Products,
the rate of reaction = k[A]^a[B]^b
where k is the equilibrium constant.
But experimentally, it has been found out that the rate of reaction may not necessarily depend on all the ‘a’ concentration terms of A or on all the ‘b’ concentration terms of B but only on some partial amount of the total concentration of A or B, say, x and y respectively.
i.e.,
Rate of Reaction = k[A]^x[B]^y
where, x and y may or may not be equal to a and b.
This above expression is called Rate Law.



Friday, 4 January 2019

Acidic and Basic strength in different cases complete information


TYPE 1.
p-Nitrophenol > p-Chlorophenol >  phenol > p-Cresol > p-Methoxy phenol
p-NitroBenzoic acid > p-ChloroBenzoic acid >  Benzoic acid > p-Toluic acid > p-Methoxy Benzoic acid
p-NitroAniline < p-ChloroAniline <  Aniline < p-Toluidine < p-MethoxyAniline 
TYPE 2…
o-BromoPhenol  > m-BromoPhenol > p-BromoPhenol  >  Phenol [10]
o-ChloroPhenol  [8.48] > m-ChloroPhenol [9.02] > p-ChloroPhenol [9.38]>  Phenol
o-FluoroPhenol  [8.81] > m-FluoroPhenol [9.28] > p-ChloroPhenol [9.95]>  Phenol
o-Bromobenzoic acid [3.1] > m-BromoBenzoic acid [3.93]> p-BromoBenzoic acid [4.1] >  Benzoic acid [4.17]
o-ChloroBenzoic acid [2.89]  > m-ChloroBenzoic acid [3.82]> p-ChloroBenzoic acid [3.98]>  Benzoic acid [4.17]
p-ChloroPhenol [9.38] > p-FluoroPhenol [9.95] > p-BromoPhenol > p-IodoPhenol > Phenol
p-ChloroBenzoic acid [3.98] > p-FluoroBenzoic acid [4.14] > p-BromoBenzoic acid [4.1] > p-IodoBenzoic acid > Benzoic acid
o-Bromoaniline [11.4] < m-Bromoaniline [10.49] < p-Bromoaniline [10.09] < Aniline 

TYPE 3….

Phenol > m-Cresol [10.08]  > p-Cresol [10.14] > o-Cresol [10.28]
O-Toluic acid [3.89] > Benzoic acid [4.17]> m-Toluic acid [4.28] > p-Toluic acid [4.35]
O-Toluidine < Aniline  < m-Toluidine  < p-Toluidine

TYPE 4…

m-Methoxyphenol [9.65]  > Phenol  > o-Methoxyphenol [9.98] > p-Methoxyphenol [10.21]
m-HydroxyPhenol (Benzene-1,3-diol) [9.44] > o-Hydroxyphenol (Benzene-1,2-diol) [9.48] > p-Hydroxyphenol (Benzene-1,4-diol) [9.96] > Phenol [10]
o-Methoxybenzoic acid = m- Methoxybenzoic acid > Benzoic acid  > p-Methoxybenzoic acid
2,6-diHydroxybenzoic acid [2.3] > o-HydroxyBenzoic acid [2.98] > m-HydroxyBenzoic acid [4.08] > Benzoic acid > p-HydroxyBenzoic acid [4.58]
p-Methoxyaniline > Aniline > o-MethoxyAniline > m-Methoxyaniline [o-isomer should be weakest due to Ortho effect, but in meta-isomer, there is only –I effect hence it becomes weakest base]

TYPE 5…..

p- NitroPhenol [7.15] > o-Nitrophenol [7.23] > m-Nitrophenol [8.40] > Phenol
[o-isomer must be strongest acid, but due to chelation (intramolecular H-bonding) b/w  adjacent–OH & – NO2, deprotonation becomes slightly difficult.]
o-NitroBenzoic acid > p-NitroBenzoic acid > m-NitroBenzoic acid > Benzoic acid
o-Nitroaniline < p-Nitroaniline  < m-Nitroaniline < Aniline

TYPE 6…..

0-Aminophenol [9.71] > m-Aminophenol [9.87] > Phenol > p-Aminophenol[10.3]
Benzoic acid [4.17] > m-Aminobenzoic acid [4.79] > p-AminoBenzoic acid [4.92] > o-Aminobenzoic acid (Anthranilic acid) [4.98]

TYPE 7..[HYDROGEN BONDING]

pKa1 (phthalic acid or Benzene-1,2-dicarboxylic acid) < pKa1(Terephthalic acid or Benzene-1,4-dicarboxylic acid) < pKa1 (Isophthalic acid or Benzene-1,3-dicarboxylic acid)
pKa1 (maleic acid) < pKa1(fumaric acid); pKa2 (maleic acid) > pKa2(fumaric acid)

TYPE 8..[SIR EFFECT]

2,6-diMethylbenzoic acid [3.21] > 2-t-ButylBenzoic acid [3.46] > o-Toluic acid [3.91]
3,5-diMethyl-4-CyanoPhenol > 2,6-diMethyl-4-CyanoPhenol   ;
[Here, “NO” SIR effect as Cyano is a linear group so, second is less acidic due to closeness of both methyl group to –OH hence greater +I decreases acidic character.]
2,6-diMethyl-4-NitroPhenol >  3,5-diMethyl-4-NitroPhenol
[In second, due to SIR effect,  Nitro group goes out of plane & hence unable to withdraw electron by –R effect.]
2,4-diNitroBenzoic acid > 2-NitroBenzoic acid > 3,5-diNitroBenzoic acid

TYPE 9..[GENERAL ORDER]

RCO2H > RCO3H (peroxycarboxylic acids)
RSO3H > RCOOH > H2CO3 [6.3] > C6H5OH [10] > CH3OH [15.5] > H2O [15.7]> ROH > RC#CH > NH3 > RCH=CH2 > RCH3 > H2
RSH >ROH

TYPE 10..[GENERAL EXCEPTIONS]

Formic acid [3.75] > Benzoic acid [4.17] > Acetic acid [4.74] [IIT 85]
C6H5-CH2-CO-OH > CH2=CH-CH2-CO-OH
CH#C-CO-OH >  CH2=CH-CO-OH > CH3CH2COOH
CH#C-CH2-CO-OH [3.22] >  CH2=CH-CH2-CO-OH [4.35]

TYPE 11..(GASEOUS PHASE/FIELD EFFECT)

t-BUTANOL > n-BUTANOL
PROPANOIC ACID > ACETIC ACID

TYPE 12..[GENERAL]

pKa value of CF3-CO-OH is zero (0.18) & it is the strongest organic acid known.[(10^5 times stronger than acetic acid.]
Formic acid is 10 times stronger than Acetic Acid.
N3H [2.810^(-5)] > CH3COOH [1.810^(-5)]
Beta-KETOESTERS are stronger acids than Alcohols & Esters.
NC-CH2-CO-OH > CH3-CO-CH2-CO-OH
CH3COOH > HO-CH2=CH2-OH > HO-OH > CH3CH2OH [IIT-80]
OXIMES(>C=N-OH) > HYDROXYL AMINE (NH2OH)

TYPE 14..[ACID-BASE REACTIONS]

Acid-base equilibriums move towards formation of weaker acids & weaker bases.
2,4,6-triNitroPhenol or Picric acid  [0.38] does dissolve in aq NaHCO3
Carboxylic acids dissolves in aq NaHCO3 whereas Phenol does not.
4-ChloroPhenol dissolves in NaOH (aq.) whereas 4-Chloro-1-methylBenzene does not.
·         Electron releasing groups (ERG) increase e- density of bases or stabilises “cationic conjugate acids” & hence increase basic character.
·         EWG increase stabilisation of “anionic” conjugate bases & hence increase acidic character.
·         Acidic Character is proportional to Stability of corresponding conjugate base.
·         Basic Character is proportional to Stability of corresponding conjugate acid.
·         Inductive effect operates from ortho as well as meta & para-positions & inductive effect is strongest from ortho position (being nearest).
·         Resonance or mesomeric effect does not affect from groups attached at meta positions. However it does affect from both ortho and para-positions with equal intensity.
·         Alkyl groups exert release e- by hyperconjugation effect (+H) from ortho & para-positions.
·         The groups having lone pair at the key atom (e,g -OH, -OR, -O-CO-R, -NH2, -NHR, NR2, -NH-CO-R, -X etc.) exert +R effect(release e- by resonance) when conjugated (alternate or attached) to unsaturated system like aromatic ring e,g, Benzene ring.
·         Order of +R effect: -NH2 > -OR > -OH >-OCH3 > -OCOR > -F > -Cl
·         CH3OH is slightly stronger acid than water hence -OCH3 is slightly more e- donating than -OH.
·         For -Cl, -Br & -I , +R effect is almost ineffective due to poor overlap of 2p orbital of Carbon with 3p or 4p or 5p of Cl, Br or I.
·         The groups having Key atom multiply bonded to more powerful electronegative atoms (e.g -NO2, -CN, -CHO, -CO-R, -COCl, -CONH2, -CO-O-COR, -CO-OR, etc) exert -R  effect (withdraw e- by resonance) when conjugated (alternate or attached) to unsaturated system like aromatic ring e,g, Benzene ring.
·         Due to ortho effect, in most cases,-
·         “Ortho-isomer of Benzoic acid is strongest Acid as compared to Simple benzoic acid or meta & para-isomers  & Ortho- isomer of Aniline is Weakest Base as compared to Simple Aniline or meta & para-isomers.”


ANCIENT SCIENCE

  https://www.youtube.com/watch?v=1eetRjqkUkQ&list=PLuR244LTfD1Dlu2JBzy6yKTCU1DBJv6oy&index=5 https://youtu.be/1eetRjqkUkQ